
The key design feature of this frame is the cage that protects your gear. This cage is removable with 4 screws that anchor the cage from the underside. This allows quick and easy maintenence of your model without taking all your FPV gear off first. The frame is a true x style frame so the distance between all 4 motors is the same.
Specs
- 5" Props
- 4mm thick carbon fiber arms
- 2mm thick carbon fiber cage/canopy plates
- 1.5mm thick carbon fiber center plates
- Optional 3D printed cage/canopy insert with our without HD cam mount
- 20-60 degrees of FPV camera tilt
- 103g as shown in the first picture with the frame and frame hardware
- 20mm of clear stack height, more room for stacking smaller items on top
Included
- 4 x Arm (4mm thick and 15mm wide)
- 1 x Bottom Plate (1.5mm)
- 1 x Top Plate (1.5mm)
- 2 xSide Plate (2mm)
- 2 x Side Mount Plate (2mm)
- 1 x VTX Plate (2mm)
- 8 x Sunk Nuts
- 4 x 28mm aluminum standoffs
- 4 x 10mm M3 bolts - For the arms
- 4 x 12mm M3 bolts - For the side mounts
- 2 x 5mm M3 bolts - For mounting the camera
- 4 x M3 nylon nuts - on top of FC stack
- 4 x 6mm M3 nylon bolts - under top plate to mount FC/PDB
- 8 x 6mm M3 M/F nylon standoffs - Under/Over FC
- 8 x 6mm M3 steel nuts - to mount side frame