Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4

iFlight REVO Bee32 F4 Flight Controller


Product Description

iFlight REVO Bee32 F4 Flight Controller


The iFlight REVO Bee32 flight controller with OSD is the most advanced, performance driven, flight controller ever designed. Capable of running 32kHz gyro sample, PID loop, and motor loop, processing all calculations in real time. The Revo Bee32 is truly at the top of its class . The Revo Bee32 uses a F405 MPU and an Invensense 20608 gyro to give you the BEST performance possible. This gyro is by far the most noise free and accurate gyro available. 


The REVO Bee32 presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in iFlight. Our filters allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! For most people tuning is not even required. Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invense 20608 gyro has never been used in any flight controller before and definitely gives you the leading advantage over others.


Just go to the google store and download the latest configurator and you should be ready to connect. Drivers should no longer be needed.

Setup Simplicity

Setting up the REVO Bee32 is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and remember the order 1, 2, 3, 4. Select your voltage on the bottom, as well as inverted or not. The REVO Bee32 also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.


-Integrated vibration dampening dummies
-True hardware radio diversity 
-Selectable voltage for your UARTs
-LED Driver for WS2812b programmable LED
-High Speed 32khz gyro, lowest noise floor and highest sensitivity gyro ever used
-Through hole solder pads – forms an I-Beam when soldered for extra strength
-FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
-Integrated buzzer driver
-Voltage and current ADC pins, for full voltage and current monitoring
-ESC flashing and configuration built into configurator
-Most active software development
-Selectable 3.3v or 5v voltage
-4 serial uarts
-F4 processor
-16mb of flash memory
-Dimensions: 36mm x 36mm
-Mounting holes: 30.5mm squared to center of holes

The iFlight Guarantee

In addition to all the other amazing things the REVO Bee32 presents, Team iFlight FPV get access to iFlight’s tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your REVO Bee32. We have by far the best support system and community in the industry. Join our slack and talk to other users, or contact support directly.

Package included:

- 1pc x Revo Bee32 F4 flight controller with OSD
- 4pc x M3 Damper 
- Cable Set



Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review